跳至主要内容

12KV vacuum bottle interrupter

12KV vacuum bottle interrupter is the core of the low voltage circuit breaker research and development. The performance of the interrupter is directly related to the breaking performance of the low-voltage circuit breaker, which determines whether the product can meet the requirements of intelligent, highly reliable new current selective protection and fault location. To this end, domestic and foreign scholars and research institutions have been committed to the field of technical research, and access to a large number of applications, such as through the double breakpoint arc technology to improve the arc voltage and mechanism speed; through gas production of reasonable settings, Improve the arc voltage and dielectric recovery strength, etc., to effectively improve the product breaking performance.

At present, the design and analysis of the low-voltage circuit breaker arc chamber is mainly through the test method and simulation analysis method. The experimental method mainly uses high-speed photography, optical fiber array and so on to study the movement characteristics of arc; simulation analysis method mainly through the establishment of arc model to study the arc. Product design is often used decoupling approach to mechanical movement, magnetic blowing layout, gas flow, respectively, were designed. In this paper, the fluid analysis model is established by the airflow field of the interrupter, and the simulation software is used to simulate and evaluate the structure of a small circuit breaker.The arc of the vacuum bottle interrupter is assumed to be in the event of a fault current, and the static and static contacts are opened. The medium of the contact gap produces a very high temperature, which emits strong light and conducts the gas.

标签

标签：

评论

发表评论

此博客中的热门博文

Insulation of vacuum interrupter

Vacuum circuit breaker insulation is divided into fracture insulation, interphase insulation and insulation to the ground. vacuum interrupter in the vacuum circuit breaker in addition to breaking the working current and short circuit current, but also bear the task of fracture isolation. At present, the manufacturer of interrupter is good and bad, in order to ensure the vacuum circuit breaker in the safe and reliable operation of the power system, vacuum interrupter as the core of the vacuum circuit breaker device to ensure its insulation capacity, select the quality assurance manufacturers is essential The Vauum interrupter contactor insulation is divided into internal insulation and external insulation, the internal insulation is divided into static insulation and dynamic insulation. In the type test, the insulation of the vacuum interrupter mainly assess the short-time power frequency withstand voltage and lightning impulse withstand voltage, and in actual use, due to grid conditi...
发表评论
阅读全文

What is the effect of the arc extinguishing device?

Is to pull the arc, sub-section, Vauum interrupter contactor device is to prevent the contact when the arc spark caused by unnecessary losses caused by the set. In a high current circuit, the contact or switch off and forth will produce arc spark, may cause the following hazards: 1, burn contact contacts, etc., over time so that the circuit is bad, resulting in circuit damage. 2, may be on the human eye, skin and other arc burns caused by the human body can not be speculation of the harm.   3, in some places sensitive to arc spark, such as gas plant or filling the flammable gas where a little bit of the spark sparks may cause an explosion and so on. 4, the spark sparks may be with the circuit for some electronic products (such as integrated circuits) caused by breakdown damage. So for safety reasons, in a large current may cause contact contacts and other places have to install a metal box to shield the spark sparks, vacuum interrupter is the most common.
发表评论
阅读全文

The process of vacuum interrupter production

The exhaust platform process refers to the vacuum interrupter parts through brazing and argon arc welding process to be made into the exhaust pipe, and then connected to the exhaust platform for vacuum and baking degassing, and finally cold folder The process of sealing. This process, the process is complex, long route, generally have 9 processes. So the efficiency is low and the Vauum interrupter contactor parts of the pollution links. Moreover, according to this process to produce vacuum interrupter baking temperature is low (450 ℃ or so), and thus degassing is not complete. A row of packaging technology Refers to the vacuum interrupter parts of the first brazing into several parts, and then several parts assembled into the vacuum interrupter the whole, and then in the vacuum furnace to complete the exhaust, bake to the gas and brazing sealing process. This process, the process is relatively simple, there are generally 7 processes, and thus more efficient and less polluting man. ...
发表评论
阅读全文